Monitor[:State] - HP E1351A User Manual

:MONitor[:STATe]

Parameters
Comments
Example
Chapter 5
DISPlay:MONitor[:STATe] <
Parameter Name
mode
•
Monitoring Switchbox Channels:
or DISPlay:MONitor[:STATe] 1
the channel state of the selected module.
OFF or
•
Selecting the Module to be Monitored: Use the
MONitor:CARD <
•
Monitor Mode on an HP 1301 Mainframe Display: The
following three examples show the types of display you will get:
•
*RST Condition:
Enabling the Monitor Mode
DISP:MON:CARD 2
DISP:MON 1
HP E1351A/53A 16-Channel FET Multiplexer Command Reference
mode turns the monitor mode on or off.
>
Parameter Type
Boolean
DISPlay:MONitor[:STATe] 0
number
> | AUTO
Chan: _
Chan: 12
Chan: 9,1
DISPlay:MONitor[:STATe] OFF | 0
Range of Values
0 | 1 | ON | OFF
DISPlay:MONitor[:STATe] ON
turns the monitor mode on to show
DISPlay:MONitor[:STATe]
turns the monitor mode off.
DISPlay
command to select the module.
No channels closed on this card.
Channel 12 closed.
4-wire ohms set-up with voltage on
channel 9.
Selects module #2 in a switchbox.
Turns the monitor mode on.
59