Initialization Form For I/O Type; Channel Types For Analog Input Modules (I/O Type 13) - Siemens SIMATIC S5 Manual

S5-115F Manual
I/O Type 13
Type 13 modules are used to configure
• Nonsafety-related analog inputs
• The CP 523 communications processor
S5-115F: Configuring the I/O Modules
I/O word
AI word
AI word
Analog input
Type number
Num. of I/O Channels :
Safety-related
Status: TYPE INPUT
F1
SEARCH
• Cyclic update. Enter "Y" here if you do not wish selective sampling.
• Module: Enter whether you want to configure a 460 AI module, a 463 AI module or a CP 523.
• Channel type
Table 1-5. Channel Types for Analog Input Modules (I/O Type 13)
Module
Channel
460-...
type 3
463-...
EWA 4NEB 811 6149-02
160
162
16
: 13 DB number
1 Subunit
: No Module (460/463/523)
Cyclic update
AI channel type
F2 F3 F4
COPY SWAP DELETE
Figure 1-29. Initialization Form for I/O Type 13
Switch Range Card
Position (only for
460 AI)
500 1AA51
mV/mA 1AA71
OFF
Measuring
range pro-
grammable
on the
module
COM 115F / PDC15
Type number
13
(4 to 255): 25
(A/B)
(Y/N)
(3 to 6): 4
F5 F6
TYPES SAVE
Measuring Range Nominal Range
(Decimal Units)
4 to 20 mA +512 to +2560
4 to 20 mA +256 to +1280
Configuring with COM 115F
: A
: 460
: Y
F7 F8
RETURN
CH AQ Module
(463 only)
---
1-43