Evaluation Of Error Dbs (Db2 And Db3) Without Com 115F - Siemens SIMATIC S5 Manual

Hide thumbs Also See for SIMATIC S5:

Table of Contents

PLC Error Messages

Evaluation of Error DBs (DB2 and DB3) without COM 115F

You will normally use COM 115F to display user-friendly error messages on your programmer

You evaluate the error DBs

if you have no CRT-based programmer

if you want to write your own error messages.

The error DBs contain all the information required for error location.

You will find notes on the structure of the error DBs in Section 5.4.2 of the Manual.

Consult the following pages for the precise meaning of the eight bytes of an error message.

S5-115F Manual

EWA 4NEB 811 6149-02