Mitsubishi Electric M800 Series Manual page 663

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
(PR) #53016
[M8]
Specify the head device No. of DO allocation devices for the 1st remote I/O unit station.
For device Y: Hexadecimal
For others: Decimal
* This parameter changes to 0 if you change the device name DO dev name #n.
* Specify DO dev name #n ahead of this parameter.
* The devices corresponding to the occupied station of the operation panel cannot be set.
---Setting range---
Decimal: 0 to 65535
Hexadecimal: 0 to FFFF
(PR) #53017
[M8]
Select at which speed to input 32 points of input data to the 1st remote I/O unit station: PLC high-speed or
PLC medium-speed.
0: PLC medium-speed
1: PLC high-speed
(PR) #53018
[M8]
Select at which speed to output 32 points of output data from the 1st remote I/O unit station: PLC high-speed
or PLC medium-speed.
0: PLC medium-speed
1: PLC high-speed
IB-1501279-H
DO dev No. #1
DI Hi-Spd #1
DO Hi-Spd #1
DO device number #1
High-speed input designation #1
High-speed output designation #1
646