2 Installation and Commissioning, IRC5
2.9.11. Installing the EPS board DSQC 646 for Electronic Position Switches
Continued
10. Remove the SMB cable from the axis
156
Action
computer and connect it to the EPS board.
Connect the SMB cable from the EPS board
to the axis computer.
11. Remove the power cable from the axis
computer and connect it to the split cable.
Connect the split cable to the EPS board
and the axis computer.
Note/illustration
xx0600003207
xx0600003208
Continues on next page
3HAC021313-001 Revision: K