Test Startup And Vehicle Connection; Settings; Application Settings - Bosch MD-200 User Manual

Turning off handset:
ss01713
MAIN MENU - Tap Below To Begin Your Diagnostic Experience
Select Vehicle
Heavy Duty
Today is Thu, 04 Jan 2018.
MD-200
1. Press and release the power button.
ss02856
MAIN MENU - Tap Below To Begin Your Diagnostic Experience
Power off
Select Vehicle OBDII
MRST will shut down.
Cancel
Heavy Duty

Settings

Today is Thu, 04 Jan 2018.
2. Select OK. The tool will now shutdown.

Test Startup and Vehicle Connection

1. Turn ON the handset.
2. Connect the OBDII/DLC cable to the scan tool.
3. Connect the OBDII/DLC cable to the DLC on the
vehicle.
4. Turn the ignition ON, but keep the engine OFF
(KOEO).
5. Select vehicle from the Main Menu screen.
6. Enter the vehicle information one of two ways:
• AutoID
• Manual entry
7. From the Vehicle selected screen, select any
diagnostic function.
©Mitchell International, Inc.
9:40
OBDII Saved Diagnostic Data Browser
Settings
Saved Diagnostic Data
OK
User Manual | Mitchell Diagnostics | Scan Tool | 11 | en
Settings
Settings allow the user to make adjustments to the
following:
• Applications
• Software information
• Software update
• Printer Setup
• Subscriptions
• User Detail
• Language
• Direct-Hit
• Service
• Report Options
ss02852
MAIN MENU - Tap Below To Begin Your Diagnostic Experience
9:40
Select Vehicle
Browser
Heavy Duty
1. Select Settings from the Main Menu.

Application Settings

From the Settings screen select Application Settings.
Follow the prompts on the screen to make changes
to the following:
• Demo Mode
• Turn Demo mode ON or OFF
• Units of measure
• Switch between Standard or Metric
• Use TPR
• Enable TRP
• Data Steam Scroll Options
• Select scrolling options
OBDII Saved Diagnostic Data
Settings
Today is Thu, 04 Jan 2018.
581624 | REV. B | 06.2017 | APDMD032018
9:40
Browser