Ford/Lincoln/Mercury - Bosch MD-200 User Manual

User Manual | Mitchell Diagnostics | Scan Tool | 30 | en

Ford/Lincoln/Mercury

When connected to a Ford/Lincoln/Mercury vehicle
a pop up menu allowing the user to choose between
specific special tests.
ss02840
2012 Ford Mustang Shelby GT500 5.4L
DTC DTC
CHECK CHECK
Read DTCs
All Systems Select Systems
Diagnostic information Automated System Test
Today is Tue, 09 Jan 2018.
1. Select Read DTCs from the screen.
ss02745
2012 Ford Mustang Shelby GT500 5.4L
Please select one or more controllers and tap 'Continue' to start DTC scan.
PCM
ABS / TRACTION CONTROL
GEM MODULE / TPMS
AIRBAG
OCCUPANT CLASSIFCATION
2. Select the desired vehicle controller then select
continue.
©Mitchell International, Inc.
Read DTCs
Data Stream
Maintenance Tests Enhanced OBDII
Continue
ss02746
Diagnostic Trouble Codes
2012 Ford Mustang Shelby GT500 5.4L PCM
4:09
3. Tapping an option in the menu takes the user to
Special Tests
that test. Follow the prompts on the screen.
ss02747
Diagnostic Trouble Codes
2012 Ford Mustang Shelby GT500 5.4L PCM
Current Codes
B10A2-00 Crash Input
B1200-00 Crash Input Mismatch - CAN
Inactive Hardwired Active
B1207-00 Crash Input Hardwired Signal
Select All
4. DTCs will be read from the selected vehicle
Deselect All
controller.
• Select a listed DTC for Related Diagnostic
Information See Diagnostic Information section
• If a DTC has Code Criteria available there will
be an "*" next to the DTC.
Manual DTCs
Certain vehicles do not support standard DTC
protocol and will require a manual process for
retrieving and clearing codes.
ss02748
Diagnostic Trouble Codes
2002 Subaru Forester Base 2.5L ABS
Manual Codes Procedure
1) Take out diagnosis connector from side of driver's seat heater unit.
2) Turn ignition switch Off.
3) Connect diagnosis connector terminal 6 to diagnosis terminal.
4) Turn ignition switch On.
5) ABS warning light is set in the diagnostic mode and blinks to identify trouble codes.
6) After the start code (11) is shown, the diagnostic trouble codes (DTC) will be shown in order
of the last information first. These repeat for a maximum of 3 minutes.
7) NOTE: When there are no diagnostic trouble codes (DTCs) in memory, only the start code (11)
1. Follow the prompts on the screen for retrieving
DTCs.
Select Option
Read DTCs
KOEO
KOER
Reset KAM
Self-Diag Clear Read
Clear Read
581624 | REV. B | 06.2017 | APDMD032018
Menu
Share Save Menu
DTC Info
DTC Info
DTC Info
Share Save Library Menu