Table of Contents
Advertisement
en | 1 0 | User guide | OBD 2220 Info Scan
1.
LCD display (color, backlit, QVGA resolution)
2.
key performs the Read Codes function and
scrolls back through the screens. Press this key
when an up arrow (
scroll backwards, or press and hold for 2 seconds
when
appears on the display to read codes.
3.
key performs the Erase Codes function and
scrolls forward through the screens. Press this key
when a down arrow ( ) appears on the display to
scroll forward, or press and hold for 2 seconds
when
appears on the display to erase codes.
4.
key returns to previous screen.
5.
key selects item.
6.
USB port provides USB connection for the computer.
7.
DLC cable provides connection for vehicle interface.
8.
Serial number plate (on back; not shown).
4.2
Specifications
Display
Operating Temperature
Storage Temperature
External Power
A minimum of 8.0 V is required for most control modules
to operate properly in a vehicle.
Dimensions
Height
Width
5.6 inches
3.5 inches
142 mm
89 mm
4.3
Display
The display has a large viewing area for displaying mes-
sages, instructions, and diagnostic information.
The back-lit liquid crystal display (LCD) is a QVGA pixel
display. Characters used to help operate the scan tool
are:
•
Indicates additional information is available by
scrolling down.
580000 | REV. A | 04.2017
) appears on the display to
6
7
Color, backlit, QVGA resolution
0 to 50°C (32 to 122°F)
-20 to 70°C (-4 to 158°F)
7 to 16 Volts
Depth
0.9 inches
23 mm
•
Indicates additional information is available by
scrolling up.
•
Indicates the
active.
•
Indicates data is available for items on the
Review Data Menu.
•
Indicates graphical viewing of data items is
available in View Data.
Keypad
The keypad is used to move through the different menus
of the scan tool. The scan tool's software is designed for
ease in operating and navigating through menus.
CAUTION
Do not use solvents such as alcohol to clean
keypad or display. Use a mild nonabrasive
detergent and a soft, cotton cloth.
CAUTION
Do not soak keypad as water might find its
way inside the scan tool.
4.4
Power
Vehicle Power
When the scan tool is connected to the vehicle's DLC,
the tool is powered by the vehicle and will automatically
turn on once connected.
USB Power
When the tool is connected to a PC via the USB cable
(not provided), the tool will automatically power up.
Refer to "6.2
Scan Tool Does Not Power Up" on page
32 if there are problems.
4.5
System Setup
System Setup allows:
•
Measurement units to be changed.
•
Scan tool information to be viewed.
•
Display to be checked.
•
Operation of the keypad to be checked.
•
Memory of the tool to be checked.
•
Scan tool to be upgraded.
•
Language to be changed.
•
Long PID names to be turned ON or OFF.
From the Diagnostic Menu:
1.
Select System Setup.
•
Use the
key until System Setup is high-
lighted.
•
Press
.
and
hot keys are
Bosch Automotive Service Solutions Inc.
Hide quick links:
Advertisement
Table of Contents
