Installation; Operating Environment; Power Supply; Power Specifications - Sony DCU-8000 Installation Manual

1-1. Operating Environment

Operating guaranteed temperature :
Performance guaranteed temperature : +10 dC to +35 dC
Operating humidity :
Storage temperature :
Mass :
Prohibited locations for installation
. Areas where the unit will be exposed do direct sunlight
or any other strong lights.
. Dusty areas
. Areas is subject to vibration.
. Areas with strong electric or magnetic fields.
. Areas near heat sources.
. Areas subject to electrical noise.
. Areas subject to static electricity.
Ventilation
The inside of the DCU-8000 is cooled by a fan (both sides
on the rear).
The power supply can be damaged if the exhaust vent
(both sides on the rear) and air intake (front panel) are
blocked or the fan is stopped.
Therefore, leave a blank space of more than 10 cm in the
front and back of the DCU-8000.

1-2. Power Supply

1-2-1. Power Specifications

A switching regulator is used for the power supply of this
unit. A voltage within the range of 100 V to 240 V can be
used without changing the supply voltage.
AC 100 to 240 V ± 10 %
Power requirements :
Power frequency : 50/60 Hz
Current consumption : Maximum 1.4 A
n
As the inrush current at turn-on is a maximum 20 A (at 100
V)/60 A (at 230 V), the capacity of the AC power must be
commensurate with this source load.
If the capacity of the AC power is not adequately large, the
AC power source breaker will operate or the unit will
abnormally operate.
DCU-8000 IM
Section 1

Installation

1-2-2. Recommended Power Cord

+5 dC to +40 dC
w
. The power cord is not supplied with the DCU-8000.
10 % to 90 %
Be sure to use the power cord that is applicable to places
_20 dC to +60 dC
in the area.
Approx. 18 kg
To avoid a fire or an electric shock, be sure to use the
(with all options
designated power cord.
installed)
. Do not damage the power cord a otherwise fire or
electric shock may result.
For customers in the U.S.A. and Canada
For customers in the all Europian countories
1 Power cord, 125 V 10 A (2.4 m) : ! 1-557-377-11
1
1 Power cord, 250 V 10 A (2.4 m) : ! 1-782-929-21
1
AC inlet
AC inlet
1-1