System Connection - Sony DCU-8000 Installation Manual

1-9. System Connection

1-9. System Connection
Configure the MVS-8000 series system connection referring to the connection example as shown below.
Connection example
Ethernet switch
(*1)
Reference video
signal (*2)
DATA CTRL REMOTE 1
Switcher Processor Pack
MVS-8400/8300/8200
(*1) : Connect each LAN (CTRL, DATA) to the separate Ethernet switches respectively.
However, a single Ethernet switch can be used for connecting each LAN.
For information about Ethernet switches that can be used in an MVS system, contact your local Sony Sales Office/Service Center.
For detailed information about setting up the Ethernet switch, refer to the documentation supplied with the switch.
(*2) : Terminate the system with the 75 Z terminators supplied. The 75 Z terminators are supplied with the equipment.
1-22
Reference video signal (*2)
Ethernet switch
(*1)
Reference video
signal (*2)
VTR
DATA LAN CTRL EDITOR
Editing Control System
BVE-9100
CTRL
REMOTE DATA
BKS-R series
HDS-X series
Device Control Unit Pack DCU-8000
DDR
DME Processor Pack
MVE-8000
PERIPH
System Control Unit
MKS-8010
PERIPH
Reference video
signal (*2)
Audio mixer
Crossover cable
BNC cable
DCU-8000 IM