Canon DP-V2411 Instruction Manual page 68

OSD Menu
Sub Menu
Reference Level High
Reference Level Low
68
Color
Y
Cb
Cr
R
G
B
Reference Level High
Reference Level Low
7
Vector Scope
Enable
Target
5
Position
8
Audio Level Meter
Enable
Channel Number
(SDI)
760 to 1023
Sets the reference display level (high). [Reference Level High] is not
displayed when [1023] is selected.
0 to 256 Sets the reference display level (low). [Reference Level Low] is not
displayed when [0] is selected.
Sets the signals to be displayed and the color of signals exceeding the reference level.
White [Y], [Cb], [Cr], [R], [G], [B]: Selects the color of the selected signal.
Red
Green
Blue [Reference Level High], [Reference Level Low]: Selects the color of the
Yellow
Cyan
Magenta
Configures various settings for the vector scope. Vector scope displays the intensity of color signals
and hue with the horizontal axis showing the color difference signal Cb and the vertical line showing
Cr.
(Cb, Cr) = (0, 0)
On, Off Switches the vector scope On, Off.
75% Sets the target.
100%
Bottom Left Selects the display position.
Bottom Right
Configures various settings for the audio level meter. Displays the audio level of the selected channel
number.
On, Off Switches the audio level meter On, Off.
2CH Sets the number of channels displayed when SDI signal is input. Options
4CH change according to the setting for [SDI Group] under [Audio Settings].
6CH When [SDI Group]
8CH
When [SDI Group]
Setting Options (Bold: factory default)
Default value of each signal is shown below.
Y (White), Cb (White), Cr (White), R (Red), G (Green), B (Blue)
signal of the selected reference level.
Default value of each reference level is shown below.
Reference Level High (Magenta), Reference Level Low (Cyan)
(Cb, Cr) = (255, 255)
Red
Magenta
Yellow
Blue
Cr
Green
Cyan
Cb
[CH1-CH8]
[2CH]: CH1 to CH2
[4CH]: CH1 to CH4
[6CH]: CH1 to CH6
[8CH]: CH1 to CH8
[CH9-CH16]
[2CH]: CH9 to CH10
[4CH]: CH9 to CH12
[6CH]: CH9 to CH14
[8CH]: CH9 to CH16