Table of Contents
Advertisement
Attaching/detaching the HC-01 AC Power Cord Clamp (provided)
Attaching
Install the AC power cord clamp before connecting the AC power cord to the main unit.
1 Insert the AC power cord clamp connector into the cord clamp
mounting hole (1).
2 Connect the AC power cord to the main unit (2).
3 Secure the AC power cord in place with the holder (3).
• The holder should always be fastened in the position as shown in the
illustration.
4 Press the holder against the main unit (4).
• Make sure that there is no slack (A).
• Pulling the holder lock lever in the direction of the arrow will allow you to
adjust the holder position (5).
Detaching
1 Pull the holder lever in the direction of the arrow (6) and remove the
AC power cord clamp from the AC power cord.
2 Press the knobs on the left and right and pull out the AC power cord
clamp from the video display (7).
Turning on the Power
1
2
3
A
5
4
7
6
19
Advertisement
Table of Contents
