Canon DP-V2411 Instruction Manual page 67

Sub Menu
3
Time Code
Enable
4
Type
Size
5
Position
6
Wave Form Monitor
Enable
Select Signal
Display Type
Select Line
5
Position
Scale
Reference Line
Display the time code superimposed on the signal.
VITC 01:23:45.05
On, Off Switches the time code display On, Off.
VITC Selects the type.
LTC
Large Selects the size.
Small
Top Left Selects the display position.
Top Right
Bottom Left
Bottom Right
Configures various settings for the wave form monitor. On the wave form monitor, the horizontal axis
shows the horizontal resolution of the video and the vertical line shows the signal level. To the right of
the wave form monitor, [Color Range] and [HDR Range] information (vertical line) is displayed.
Signal level
On, Off Switches the wave form monitor On, Off.
Y, Cb, Cr, R, G, B Sets the waveform to be displayed.
All Sets the display type.
Line
[Line]: The data for one line is displayed.
1 to 2160 Selects the line to be displayed when [Line] is selected.
Bottom Left Selects the display position.
Bottom Right
Automatic Sets the scale of the wave form monitor.
IRE
Canon Log [Automatic]: Sets in accordance with the [Gamma] and [Color Range]
Canon Log 2
Canon Log 3
ST 2084 (PQ) Full
ST 2084 (PQ) Limited
Hybrid Log-Gamma
4 to 1023 A guide is displayed at the specified position. [Reference Line] is not
displayed when [1023] is selected.
Setting Options (Bold: factory default)
255
0
Horizontal resolution of video
settings.
OSD Menu
67
IRE
100 %
50 %
0%
-4%