Installing An S120 Combi Power Module - Siemens SINAMICS S120 Combi User Manual

S120 Combi Power Modules
3.7 Installation
3.7.2

Installing an S120 Combi Power Module

An S120 Combi Power Module is installed after the reinforcement plates have been installed.
Installation steps
1. Mount the M6 self-clinching flush head studs
2. Locate the S120 Combi Power Module
3. Initially tighten the M6 nuts by hand (0.5 Nm).
4. Tighten the nuts in the specific sequence (1 to 4) with 10 Nm
Figure 3-16 Installing an S120 Combi Power Module
86
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3