Additional system components
10.1 Terminal Module TM54F
10.1.8
Protective conductor connection and shield support
It is always advisable to shield the digital input and output wiring.
The following diagram shows a typical Weidmüller shield connection clamp for the shield
supports.
1
①
②
Figure 10-5
If the shielding procedures described and the permissible cable lengths are not observed,
the machine may malfunction.
NOTICE
Only use screws with a permissible insertion depth of 4 - 6 mm.
190
Protective conductor connection M4/1.8 Nm
Shield connection terminal, Weidmüller company, type: KLBÜ CO1, order number:
1753311001
Shield support and protective conductor connection
DANGER
2
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
SINAMICS S120 Combi