Siemens SINAMICS S120 Combi User Manual page 7

Extensions or changes made by the machine manufacturer must be documented by the
machine manufacturer.
For reasons of clarity, this documentation does not contain all of the detailed information on
all of the product types. This documentation cannot take into consideration every
conceivable type of installation, operation and service/maintenance.
Technical support
Country-specific telephone numbers for technical support are provided in the Internet under
Contact:
http://www.siemens.com/automation/service&support
EC Declarations of Conformity
The EC Declaration of Conformity for the EMC Directive can be found on the Internet at:
http://support.automation.siemens.com
There – as a search term – enter the number 15257461 or contact your local Siemens office.
The EC Declaration of Conformity for the Low Voltage Directive can be found on the Internet
at:
http://support.automation.siemens.com
There – as a search term – enter the number 22383669 .
Note
When operated in dry areas, SINAMICS S devices conform to the Low Voltage Directive
73/23/EEC or 2006/95/EEC.
Note
SINAMICS S devices fulfill EMC Directive 89/336/EEC or 2004/108/EEC in the configuration
specified in the associated EC Declaration of Conformity for EMC and when the
Configuration Manual EMC Installation Guideline, order number 6FC5297-0AD30-0⃞P⃞, is
implemented.
Note
The Manual describes a desired state which, if maintained, ensures the required level of
operational reliability and compliance with EMC limit values.
Should there be a deviation from the Equipment Manual requirements, appropriate actions
(e.g. measurements) must be taken to check/prove that the desired reliable operation is
ensured and EMC limit values are complied with.
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
Preface
5