Panasonic KX-NS1000 Programming Manual page 745

PC Programming Manual References
10.4 PBX Configuration—[2-4] System—Week Table
Feature Guide References
2.18.1 Doorphone Call
Tenant Number
Specifies the tenant number for the doorphone port in order to apply the Time Table (day/lunch/break/night).
Value Range
1–32 or 1–128
Note
The maximum number of time tables (1 per tenant) depends on the System Capacity Selection setting
made when the Easy Setup Wizard was run for the PBX. If the System Resource Type was selected, the
maximum number of tenants (and therefore, time tables) is 128. If the Standard Type or IP-Extension
Type was selected, the maximum number of tenants is 32. For details, refer to "5.4.1 Easy Setup
Wizard" in the Installation Manual.
Maintenance Console Location
13.1 PBX Configuration—[5-1] Optional Device—Doorphone
PC Programming Manual References
10.4 PBX Configuration—[2-4] System—Week Table
Feature Guide References
2.18.1 Doorphone Call
5.1.3 Tenant Service
COS
Specifies the Class of Service (COS) number. COS programming determines the doorphone ports that are
able to make trunk calls, and sets restrictions on intercom calls from certain extensions (Internal Call Block).
Value Range
1–512
Maintenance Console Location
13.1 PBX Configuration—[5-1] Optional Device—Doorphone
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—TRS—
Lunch, Break, Night
10.7.3 PBX Configuration—[2-7-3] System—Class of Service—Internal Call Block
13.1 PBX Configuration—[5-1] Optional Device—Doorphone
TRS Level—Day,
PC Programming Manual 745