Panasonic KX-NS1000 Programming Manual page 543

FWD/DND Cycle Switch: Switch the FWD on/DND on/Off mode instead of entering the programming mode
for the FWD/DND setting. (When there are separate FWD/DND settings for calls from trunks and calls from
extensions, mode switching cannot be performed.)
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
Feature Guide References
2.3.1 Call Forwarding (FWD)/Do Not Disturb (DND)—SUMMARY
PT Fwd / DND—Paging to DND Extension
Specifies whether extensions can receive paging when in DND mode.
Value Range
Do Not Page, Page
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
11.4 PBX Configuration—[3-4] Group—Paging Group
Feature Guide References
2.17.1 Paging
PT Fwd / DND—Extension Status of Mobile Integration (FWD NA to CO)
Specifies whether an extension is shown as idle or busy when it forwards a call to a trunk on no answer.
Value Range
Idle, Busy
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual 543