Pbx Configuration—[3-2] Group—User Group - Panasonic KX-NS1000 Programming Manual

11.2 PBX Configuration—[3-2] Group—User Group
11.2 PBX Configuration—[3-2] Group—User Group
Extensions can be assigned to a tenant according to their extension user groups. An extension user group can
belong to only one tenant. However, one extension user group can belong to several call pickup groups and
several paging groups. A maximum of 32 or 128 tenants can be programmed.
Note
The maximum number of tenants depends on the System Capacity Selection setting made when the
Easy Setup Wizard was run for the PBX. If the System Resource Type was selected, the maximum
number of tenants is 128. If the Standard Type or IP-Extension Type was selected, the maximum number
of tenants is 32. For details, see "5.4.1 Easy Setup Wizard" in the Installation Manual.
User Group Name
Specifies the name of the extension user group.
Value Range
Max. 20 characters
Maintenance Console Location
11.2 PBX Configuration—[3-2] Group—User Group
PC Programming Manual References
11.3 PBX Configuration—[3-3] Group—Call Pickup Group
11.4 PBX Configuration—[3-4] Group—Paging Group
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main—
Feature Guide References
5.1.2 Group
Tenant Number
Specifies the tenant to which the extension user group belongs.
Value Range
1–32 or 1–128
Note
The maximum number of tenants depends on the System Capacity Selection setting made when the
Easy Setup Wizard was run for the PBX. If the System Resource Type was selected, the maximum
number of tenants is 128. If the Standard Type or IP-Extension Type was selected, the maximum number
of tenants is 32. For details, refer to "5.4.1 Easy Setup Wizard" in the Installation Manual.
Maintenance Console Location
11.2 PBX Configuration—[3-2] Group—User Group
594 PC Programming Manual
User Group
User Group