7 Commissioning the MBTS by Using Local Maintenance
Terminal and M2000
l
l
Step 3 Run ping target_name -t in the command window to check the connection between the LMT
client and the NodeB. "target_name" is the OM IP address of the base station.
----End
7.5.3 Logging In to the LMT
This section describes how to log in to the NodeB LMT.
Prerequisite
The communication between the LMT client and the NodeB is normal.
Procedure
Step 1 Choose Start > All Programs > HUAWEI Local Maintenance Terminal. If the Local
Maintenance Terminal is started, choose System > Logout, or click
dialog box is displayed, as shown in
Figure 7-29 User Login dialog box
Table 7-4
Table 7-4 Fields in the User Login dialog box
Field
User Name
7-34
NOTE
Different devices must correspond to different IP addresses.
The IP addresses on the same network segment correspond to the same subnet masks and subnet addresses
(subnet mask AND IP address).
describes the fields in the User Login dialog box.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Figure
7-29.
Description
Type the user name of the NodeB. By default,
the user name is admin. The user name is
mandatory and case-sensitive.
Commissioning Guide
. The User Login
Issue 02 (2010-07-30)