3900 Series Multi-Mode Base Station
Commissioning Guide
Figure 7-3 Communication failed dialog box
Step 2 Click Yes.
The Set Communication Port Parameter dialog box is displayed, as shown in
Figure 7-4 Set Communication Port Parameter dialog box
Step 3 In the Select Communication Port area, click Network Port. In the Configure IP area, set the
IP address to 192.168.0.72.
Step 4 Click OK.
The interface shown in
Step 5 In the Site Maintenance Terminal System window, click User, and select User Login. Enter
User Name (Omc by default) and User Password (omc by default).
----End
7.3 Configuring the Basic Data of the GBTS
This section describes how to configure the basic data of the GBTS such as the GBTS boards
and logical objects. You must configure the basic data of the GBTS before performing the local
commissioning on the GBTS side.
Issue 02 (2010-07-30)
7 Commissioning the MBTS by Using Local Maintenance
Figure 7-2
is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Terminal and M2000
Figure
7-4.
7-9