Figure 7-7 Board Configuration Window - Huawei 3900 Series Commissioning Manual

7 Commissioning the MBTS by Using Local Maintenance
Terminal and M2000
Procedure
Step 1 Click Board in the navigation tree.
The Board Configuration and Board Management windows are displayed.
Step 2 Double-click Board Configuration.
The Board Configuration window is displayed, as shown in

Figure 7-7 Board Configuration window

7-12
NOTE
The following description takes the MRFU as an example to explain the procedure of configuring the
l
RF units for the BTS3900.
The RF units of the BTS3900A are installed in the RFC. Thus, the RF units must be configured on the
l
RFC interface of the SMT.
The configuration of the BTS3900L is the same as the BTS3900. Right-click an idle RFU slot in the
l
Board Configuration window and perform the configuration.
The RF units of the DBS3900 must be configured in the Topology Configuration window.
l
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Commissioning Guide
Figure 7-7.
Issue 02 (2010-07-30)