7.18.3 Profile Fix
This function corrects the height of the profile in the profile view. The Profile Fix does not
correct the height of the image displayed in the image view.
1. Select the line displayed the profile on the image view.
2. Click the [Fix] button on the [Profile fix] block.
3. The mouse cursor changes into
condition, specify the 3 points that correct the height on the profile.
Figure 7.18.3-2 Example of Operating the Profile fix
Figure 7.18.3-1 Profile fix Block
when moving it to the profile view. With such a
7 - 58
Specified position
of the Profile fix