Sony IPELA PCS-G50 Operating Instructions Manual page 38

When you use one ISDN line, enter the
same number both in the A1 and A2 text
boxes (except for the USA and Canada).
Note
• When you use the PCSA-B384S ISDN
unit and connect 2 or 3 ISDN lines, enter
the sub-addresses in the B1 to C2 text
boxes in addition to the A1 and A2
boxes.
• When you use the PCSA-B768S and
connect 2 to 6 ISDN lines, enter the sub-
addresses in the B1 to F2 text boxes in
addition to the A1 and A2 boxes. To
open the menu with these text boxes,
select "Next", then press the PUSH
ENTER button.
10
Use the V, v, B or b button to select
"Next", then press the PUSH ENTER
button.
11
Set the following items on the LAN.
DHCP Mode
Sets the DHCP (Dynamic Host
Configuration Protocol).
Auto: Automatically assigns your IP
address, network mask, gateway
address and DNS address.
38
Setting Up the System for the First Time — Initial Setup Wizard
Off: Deactivates DHCP. In this case set
your IP address, network mask,
gateway address and DNS address
manually.
Host Name
Enter your host name.
IP Address
Enter your IP address.
Network Mask
Enter your network mask.
Gateway Address
Enter your default gateway address.
DNS Address
Enter your DNS (Domain Name
System) server address.
Note
When you set "DHCP Mode" to "Auto",
the assigned IP address is shown in the
launcher menu (page 79) or Information
menu (page 70).
If you do not know how to set up the LAN
configuration, contact your network
administrator.
12
Use the V, v, B or b button to select
"Save", then press the PUSH ENTER
button.
Save
Previous
The settings are saved.
To cancel the setting
V, v, B or b
Press the
"Cancel", then press the PUSH ENTER
button.
To go back to the previous wizard
V, v, B or b
Press the
"Previous", then press the PUSH ENTER
button.
Cancel
button to select
button to select