Sony IPELA PCS-G50 Operating Instructions Manual page 242

Signal
RAS (PCS-G50/
G50P)
RAS
(GateKeeper)
Q.931 (dial)
Q.931 (answer)
H.245
Audio RTP
Audio RTCP
Video RTP
Video RTCP
FECC RTP
FECC RTCP
Data conference/
RTP
Data conference/
RTCP
When H.323 MCU software is
installed (Default)
When "Port Number Used" is set to
"Default" in NAT/Port of the LAN Setup
menu, the PCS-PG50/PG50P operated as the
main terminal uses the following port
numbers.
Signal Port number
(First point)
RAS (PCS- Any number from 2253 to
PG50/PG50P) 2263 (using Gate
Keeper)
RAS (Gate 1718 or 1719 (using Gate
Keeper) Keeper)
Q.931 (dial) Any number from 2253 to
2263
Q.931 (answer) 1720
H.245 Any number from 2253 to
2263
Audio RTP 49152
242
Specifications
Port number
Any number from 3000
to 3002 (using
GateKeeper)
1718 or 1719 (using
GateKeeper)
Any number from 3000
to 3002
1720
Any number from 3000
to 3002
3100
3101
3102
3103
3104
3105
3106
3107
Port number
th
(N point)
49152+20 ×
(N-1)
Signal Port number
(First point)
Audio RTCP 49153
Video RTP 49154
Video RTCP 49155
FECC RTP 49156
FECC RTCP 49157
Data 49158
conference/RTP
Data 49159
conference/
RTCP
When H.323 MCU software is
installed (Custom: TCP Port
Number 3000 and UDP Port Number
3000)
When "Port Number Used" is set to
"Custom" in NAT/Port of the LAN Setup
menu, the PCS-PG50/PG50P uses the port
numbers defined by the values entered in
"TCP Port Number" and "UDP Port
Number".
For example, when "TCP Port Number" is
set to "3000" and "UDP Port Number" is set
to "3100", the PCS-PG50/PG50P operated
as the main terminal uses the following port
numbers.
Signal Port
number
(First point)
RAS (PCS- Any number from 3000 to
PG50/PG50P) 3010 (using Gate
Keeper)
RAS 1718 or 1719 (using Gate
(GateKeeper) Keeper)
Q.931 (dial) Any number from 3000 to
3010
Q.931 (answer) 1720
H.245 Any number from 3000 to
3010
Port number
th
(N point)
49153+20 ×
(N-1)
49154+20 ×
(N-1)
49155+20 ×
(N-1)
49156+20 ×
(N-1)
49157+20 ×
(N-1)
49158+20 ×
(N-1)
49159+20 ×
(N-1)
Port number
th
(N point)