And Isdn For Multipoint Conference - Sony IPELA PCS-G50 Operating Instructions Manual

System Configuration via a LAN and ISDN for Multipoint
Conference
Installing the optional PCSA-M3G50 H.323 MCU software (for LAN) and
PCSA-M0G50 H.320 MCU software (for ISDN) enables conduct of a
multipoint conference via a LAN and ISDN mixed.
Two Communication Terminals in which MCU software is installed must be
connected via a LAN.
This allows you to:
• Hold a multipoint videoconference among up to ten sites over LAN and
ISDN.
• Show still images stored on a "Memory Stick".
• Show the still images on the second TV monitor or projector.
• Pick up a large number of participants' voices using up to two external
microphones.
System configuration
1 PCS-PG50/PG50P Communication Terminal
2 PCSA-CG70/CG70P Camera Unit
3 PCS-RG70 Remote Commander
4 Remote Control Receiver
5 TV monitor (not supplied)
6 PCSA-M3G50 H.323 MCU software (not supplied)
7 PCSA-M0G50 H.320 MCU software (not supplied)
8 PCSA-B384S or PCSA-B768S ISDN Unit (not
supplied)
9 PCS-A1 Microphone
20
System Configuration
* Be sure to connect two
Communication Terminals,
with the MCU software
installed, via a LAN.
*
The illustration shows an
example using the
PCSA-B768S ISDN Unit.