Sending Audio/Video From The External Equipment To A Remote Party - Sony IPELA PCS-G50 Operating Instructions Manual

Sending Audio/Video from the External
Equipment to a Remote Party
The Communication Terminal allows you to send the picture and sound output
from the connected equipment such as a VCR to the remote party.
To connect the video equipment for input
The Communication Terminal is equipped with two video inputs.
VCR, etc.
to video
output
To input audio/video from external equipment
To input video
Open the Video Input Select menu by pressing the VIDEO INPUT SELECT
button on the Remote Commander, then select the desired video input from the
"Near" text box in the menu.
To input the video from the equipment connected to the AUX IN jack, choose
"AUX 1".
To input audio
Set "Input Select" to "AUX" or "MIC + AUX" on page 1 of the Audio Setup
menu. (See page 53.)
When set to "AUX", the sound from the external equipment is input and the
sound from a microphone is deactivated. When set to "MIC + AUX", both
sounds are input.

Sending Audio/Video from the External Equipment to a Remote Party

to audio
Audio cable (not supplied)
output
Video cable (not supplied)
TERMINAL VISCA OUT
AUDIO OUT AUDIO IN VIDEO IN
(MIXED) AUX LINE MIC CAMERA AUX IN
(PLUG IN POWER)
1 2
WHITE 100BASE-TX/
DC 19.5V IR OUT 1 2
EC-MIC RGB OUT BOARD 10BASE-T
AUX CONTROL
1 2 CTRL-S 1 2
AUX MONITOR
VIDEO OUT
to
AUX
to AUDIO IN
IN
Video
conversion cable
(supplied)
DSB
ISDN UNIT
141