Maximum Load-Balancing (Rip View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

route-policy route-policy-name: Specifies a routing policy with 1 to 63 case-sensitive characters.
Description
Use import-route to enable route redistribution from another routing protocol.
Use undo import-route to disable route redistribution.
By default, RIP does not redistribute routes from other routing protocols.
The import-route bgp command only redistributes eBGP routes. The import-route bgp
allow-ibgp command additionally redistributes IBGP routes, which may cause routing loops.
Only active routes can be redistributed. Use the display ip routing-table protocol command to
display route state information.
The undo import-route protocol all-processes command cancels the configuration made by the
import-route protocol all-processes command, rather than the import-route protocol process-id
command.
Related commands: default cost.
Examples
# Redistribute static routes, and set the cost to 4.
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] import-route static cost 4
# Configure the default cost for redistributed routes as 3.
[Sysname-rip-1] default cost 3
# Redistribute OSPF routes with the cost being the default cost.
[Sysname-rip-1] import-route ospf

maximum load-balancing (RIP view)

Syntax
maximum load-balancing number
undo maximum load-balancing
View
RIP view
Default level
2: System level
Parameters
number: Maximum number of ECMP routes , in the range of 1 to 8.
Description
Use maximum load-balancing to specify the maximum number of ECMP routes.
Use undo maximum load-balancing to restore the default.
By default, the maximum number of ECMP routes is 8.
Examples
# Specify the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] rip
42