Opaque-Capability Enable - HP FlexNetwork 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
default-route-advertise: Usable on an NSSA ABR or an ASBR only. If it is configured on an NSSA
ABR, the ABR generates a default route in a Type-7 LSA into the NSSA area regardless of whether a
default route is configured. If it is configured on an ASBR, only a default route is configured on the
ASBR can it generates the default route in a Type-7 LSA into the attached area.
no-import-route: Usable only on an NSSA ABR that is also the ASBR of the OSPF routing domain
to disable redistributing routes in Type-7 LSAs into the NSSA area, making sure that correct external
routes are redistributed.
no-summary: Usable only on an NSSA ABR to advertise a default route in a Type-3 summary LSA
into the NSSA area and to not advertise other summary LSAs into the area. Such an area is a totally
NSSA area.
translate-always: Specifies the NSSA ABR as a translator to translate Type-7 LSAs to Type-5 LSAs.
translator-stability-interval value: Specifies the stability interval of the translator, during which the
translator can maintain its translating capability after a device with a higher priority becomes a new
translator. The value argument is the stability interval in seconds, which is in the range of 0 to 900
and defaults to 0 (which means the translator does not maintain its translating capability if a new
translator arises).
Description
Use nssa to configure the current area as an NSSA area.
Use undo nssa to restore the default.
By default, no NSSA area is configured.
All routers attached to an NSSA area must be configured with the nssa command in area view.
Related commands: default-cost.
Examples
# Configure Area 1 as an NSSA area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] nssa

opaque-capability enable

Syntax
opaque-capability enable
undo opaque-capability
View
OSPF view
Default level
2: System level
Parameters
None
104