Display Rip Route - HP FlexNetwork 3600 v2 Series Command Reference Manual

Field
MetricOut
MetricOut route policy
Split-horizon
Poison-reverse
Input/Output
Default route
Current packets number/Maximum packets number

display rip route

Syntax
display rip process-id route [ ip-address { mask | mask-length } | peer ip-address | statistics ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
ip-address { mask | mask-length }: Displays route information about a specified IP address.
peer ip-address: Displays all routing information learned from a specified neighbor.
statistics: Displays the route statistics, including total number of routes and number of routes of
each neighbor.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
Description
designated.
Additional routing metric added to the outgoing
routes.
Name of the routing policy used to add the additional
routing metric for the outgoing routes. If no routing
policy is referenced, the field displays Not
designated.
Indicates whether split-horizon is enabled:
•
on—Enabled.
•
off—Disabled.
Indicates whether poison-reverse is enabled:
•
on—Enabled.
•
off—Disabled.
Indicates if the interface is allowed to receive (Input)
or send (Output) RIP messages:
•
on—Means it is allowed.
•
off—Means it is not allowed.
Indicates whether sending the default route to RIP
neighbors is allowed:
•
on—Means it is allowed.
•
off—Means it is not allowed.
Packets to be sent/Maximum packets that can be
sent on the interface.
35