rfc1583 compatible
Syntax
rfc1583 compatible
undo rfc1583 compatible
View
OSPF view
Default level
2: System level
Parameters
None
Description
Use rfc1583 compatible to make routing rules defined in RFC 1583 compatible.
Use undo rfc1583 compatible to disable the function.
By default, RFC 1583 routing rules are compatible.
RFC 1583 and RFC 2328 have different routing rules on selecting the best route when multiple AS
external LSAs describe routes to the same destination. Using this command can make them
compatible. If RFC 1583 is made compatible with RFC 2328, the routes in the backbone area are
preferred, if not, the routes in the non-backbone area are preferred to reduce the burden of the
backbone area.
Examples
# Disable making RFC 1583 routing rules compatible.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] undo rfc1583 compatible
router id
Syntax
router id router-id
undo router id
View
System view
Default level
2: System level
Parameters
router-id: Router ID, in the form of a dotted decimal IPv4 address.
Description
Use router id to configure a global router ID.
Use undo router id to remove the global router ID.
By default, no global router ID is configured.
118