Configuring A Vsi; Configuring A Pw; Configuring A Pw Class; Configuring A Static Pw - HP FlexNetwork 10500 Series Configuration Manual

Configuring a VSI

Step
1. Enter system view.
2. Create a VSI and enter VSI
view.
3. (Optional.) Configure a
description for the VSI.
4. (Optional.) Set the default
PW ID for the VSI.
5. Set an MTU for the VSI.
6. (Optional.) Enable the VSI.

Configuring a PW

Configuring a PW class

In a PW class, you can configure PW attributes such as the PW type, and whether to enable control
word. To simplify PW configuration, you can configure PWs with the same attributes by referencing
the same PW class.
To configure a PW class:
Step
1. Enter system view.
2. Create a PW class and enter
PW class view.
3. (Optional.) Enable control
word.
4. (Optional.) Specify the PW
type.

Configuring a static PW

Step
1. Enter system view.
2. Enter VSI view.
3. Specify static signaling
for PWs, and enter VSI
static view.
Command
system-view
vsi vsi-name
description text
default-pw-id default-pw-id
mtu size
undo shutdown
Command
system-view
pw-class class-name
control-word enable
pw-type { ethernet | vlan }
[ force-for-vpls ]
Command
system-view
vsi vsi-name
pwsignaling static
378
Remarks
N/A
By default, no VSIs exist.
By default, no description is
configured for a VSI.
By default, no default PW ID is
configured for the VSI.
By default, the MTU of a VSI is
1500 bytes.
By default, a VSI is enabled.
Remarks
N/A
By default, no PW classes exist.
By default, control word is
disabled.
By default, the PW type is VLAN.
Remarks
N/A
N/A
By default, no PW signaling protocol is
specified.