Mounting - Siemens SINAMICS S120 Equipment Manual

Cabinet design and EMC for components, Blocksize format
9.4 Arrangement of components and equipment
9.4.2

Mounting

The components should be mounted on a conductive mounting surface to ensure low
impedance between the component and the mounting surface. Mounting plates with a
galvanized surface are suitable.
Figure 9-1
Wiring rules for DRIVE-CLiQ
Refer to /IH1/ SINAMICS Commissioning Manual.
9-10
Mounting the CU310 onto the Power Module 340 (frame size D)
Equipment Manual AC Drive
Manual, (GH6), 03/2006 Edition, 6SL3097-2AL00-0BP0