Control Unit Cu310 Pn (Profinet); Description; Safety Information - Siemens SINAMICS S120 Equipment Manual

Control Units

6.3 Control Unit CU310 PN (PROFINET)

6.3 Control Unit CU310 PN (PROFINET)
6.3
6.3.1

Description

The Control Unit 310 PN (PROFINET) is the control module in which the open-loop and
closed-loop control functions of a drive are implemented.
The CU310 PN has the following interfaces (ports):
Table 6-13
Type
Digital inputs
Digital inputs/outputs
DRIVE-CLiQ interface
PROFINET interfaces
Serial interface (RS232)
Power Module Interface (PM-IF)
Encoder interface (HTL/TTL)
EP terminals/
temperature sensor connection
24 V electronics power supply
Test sockets
Interface for BOP
Available from approx. 07/2006.
6.3.2

Safety information

Note
The CompactFlash card may only be inserted and removed from the Control Unit when in
the no-voltage condition.
Caution
The cooling clearances of 50 mm above and below the components must be observed. It is
not permissible that the connecting cables cover the cooling openings.
6-22
Overview of the CU310 PN interfaces (ports)
Number
4
4
1
2
1
1
1
1
1
3+1
1
Manual, (GH6), 03/2006 Edition, 6SL3097-2AL00-0BP0
Equipment Manual AC Drive