System Data - Siemens SINAMICS S120 Equipment Manual

Hide thumbs Also See for SINAMICS S120:
Table of Contents

Advertisement

System overview

1.6 System data

The following power components are available:
• Line-side power components, such as fuses, contactors, reactors and line filters for
• Power Modules, either with or without integrated line filter as well as integrated braking
To address the required functions, SINAMICS S120 AC Drive is equipped with:
• Control Units that provide the drive and technological functions.
• Supplementary system components that enhance functionality and offer different
The SINAMICS S120 AC Drive components were developed for installation in cabinets.
They have the following features and characteristics:
• Easy to handle, simple installation and wiring
• Practical connection system, cable routing in accordance with EMC requirements
• Standard design
1.6
System data
1.6
Table 1-1
General technical data
Electrical data
Line connection voltage
Blocksize format units
Chassis format units
Line frequency
Output voltage
Blocksize format units
Chassis format units
Electronics power supply
Blocksize format units
Chassis format units
Radio interference suppression
Blocksize format units
Standard
With line filter
1-6
switching the power supply and complying with EMC regulations.
chopper to provide power to the connected motor
interfaces for encoders and process signals.
1-ph. 200 V to 240 V AC ± 10%.
3-ph. 380 V to 480 V AC ± 10%.
Installation altitudes up to 2000 m above sea level.
De-rating is required above 2000 m.
3-ph. 380 V to 480 V AC ± 10%.
Installation altitudes up to 2000 m above sea level.
De-rating is required above 2000 m.
47 Hz to 63 Hz.
0 V to line supply voltage for 3-ph. 380 V to 480 V AC units.
0 V to 0.78 V line supply voltage for 1-ph. 200 V to 240 V AC units.
0 V to line supply voltage for 3-ph. 380 V to 480 V AC units.
24 V DC, -15/+20 %*).
*) If a motor holding brake is used, restricted voltage tolerances may
have to be taken into account.
24 V DC, -15/+20 %.
No radio interference suppression.
Category C2 acc. to EN 61800-3.
Manual, (GH6), 03/2006 Edition, 6SL3097-2AL00-0BP0
Equipment Manual AC Drive

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents