Managing Alarms - Siemens RUGGEDCOM WIN5123 User Manual

RUGGEDCOM WIN
User Guide
Section 4.10

Managing Alarms

This section describes how to configure and manage alarms.
CONTENTS
• Section 4.10.1, "Viewing Alarms"
• Section 4.10.2, "Clearing Alarms"
Section 4.10.1
Viewing Alarms
To view current system alarms, navigate to Management » Alarms and Traps. The System Alarms screen
appears.
Figure 41: System Alarms Screen
The table provides the following information:
Parameter
Number of Critical Alarms
Number of Major Alarms
Number of Warning Alarms
The table provides the following information:
Parameter
ID
Name
Status
Managing Alarms
Description
Displays the number of critical alarms.
Displays the number of major alarms.
Displays the number of warning or advisory alarms.
Description
Displays the alarm type identification number.
Displays the alarm type. For a list of alarm and trap conditions, refer to
"Viewing a List of Traps" .
Synopsis: {On, Off}
Indicates if the alarm type is enabled or disabled.
Chapter 4
System Administration
Section 5.12.2.3,
45