Chapter 4
System Administration
Figure 31: System Functions Screen
2.
In the Link Timeout list, type the number of minutes for the timeout. The default value is 15.
3.
Click Apply.
Section 4.3
Changing the Administrator Password
To change an administrator password, do the following:
1.
Navigate to Management » Access Permissions. The Device Access Permissions screen appears.
Figure 32: Device Access Permissions Screen
In the Password parameter, type the new password. The default password is generic.
2.
3.
In the Retype Password parameter, retype the new password.
4.
Click Apply.
38
RUGGEDCOM WIN
Changing the Administrator Password
User Guide