INSPECTION AND MAINTENANCE
Rear combination light
(tail, stop, turn signal, etc.)
(1)
(1)
(2)
68LM704
Remove the screw (1). Remove the combi-
nation light (2) by pulling it outside.
License plate light
(3)
(2)
68LM705
7-27
To remove license plate light, cover trim on
the license lamp needs to be removed. To
open the trim (1), insert a flat blade screw
driver into the hole (3) and remove the
clips (2) by twisting the driver as shown in
the figure. Then after pushing the license
lamp it can be taken out.
Luggage compartment light
(if equipped)
68LM717
Trunk Room Light (if equipped)
High-mount stop light
Swift
(1)
To remove a high-mount stop light housing
the following procedure:
1) Open the tailgate, and remove the nuts
(1) as shown in the illustration.
74LH0-74E
80J100