Table of Contents
Advertisement
OPERATING YOUR VEHICLE
engaging the clutch. When the gearshift
lever is in any of the positions "D", "M" or
"R", and you release your foot from the
brake pedal, the vehicle starts slowly with-
out depressing the accelerator pedal. The
creeping function is disabled if you depress
the brake pedal or pull up the parking
brake lever. Creep is not possible in man-
ual mode with 2nd gear engaged.
NOTE:
If the driver's door is opened and/or the
parking brake lever is engaged with the
gear in the "M", "D" or "R" position, the
creeping function will not operate.
Parking and Stopping the vehicle
Auto Gear Shift does not have a parking
position. The vehicle can be parked with
the gearshift lever at "D" or "R" position.
Remember, even though the transaxle is in
gear, you must set the parking brake firmly.
NOTICE
A buzzer will sound continuously if
the vehicle is operated with the gear-
shift lever in-between of each shift
positions. The vehicle will become
inoperative if you continue to operate
the vehicle with the gearshift lever in-
between shift positions.
3-19
Drive (D) mode
When the Drive (D) mode is activated, the
most appropriate gear position is automati-
cally selected upon operation of the accel-
erator pedal and variation of vehicle speed.
Normal driving:
1) Start the engine as instructed in "Start-
ing the engine" in this section.
2) With your foot on the brake pedal, shift
the gearshift lever to the "D" position.
When the gearshift lever is shifted to
the "D" position, the gear will be shifted
to 1st.
76MH0A057
NOTE:
• If 1st gear cannot be engaged even
though the gearshift lever has been
shifted from the "N" to the "D" position,
the system will re-try shifting automati-
cally. This will take some time, noise
may be heard from the gears, and shift-
ing gear shock may occur. However,
they do not indicate a malfunction.
• The "N" indicator will flash, the depress
brake pedal indicator will come on and a
warning buzzer (long pulse sound) will
sound if any of the following cases
occur;
– If you shift the gearshift lever from the
"N" to the "D" position without depress-
ing the brake pedal
– If the system is unable to re-try shifting
You should depress the brake pedal and
shift the gearshift lever to "N" position,
then shift to "D" again.
3) Release the parking brake and brake
pedal.
4) Depress the accelerator pedal slowly.
WARNING
• While driving the vehicle, do not
shift the gearshift lever to the "N"
position. The engine brake may not
work and you may get involved in
an unexpected accident. If you
return the gearshift lever from "N"
to "D" because of unintended shift-
ing, the gear position will be shifted
according to the current vehicle
speed.
• Always keep your foot on the brake
pedal
while
stopped
with
engine running. This operation pre-
vents the vehicle from moving due
to unintended activation of the
creeping function.
74LH0-74E
the
Advertisement
Table of Contents
