Accessing By Setting/ Monitoring Tool For C Controller Module - Mitsubishi Electric GOT2000 Series Connection Manual

22.7.19 Accessing by Setting/ Monitoring tool for C Controller module

The following shows the procedure to set the FA transparent function of Setting/Monitoring tool for C Controller module (Q
Series) with the C Controller module (Q24DHCCPU-V) connected.
■1. When connecting the GOT and personal computer with USB
(1) When connecting the GOT and PLC in bus connection
Step 1.
Click the Connection Destination view
the Navigation window of MT Setting/Monitoring tool for C Controller module.
Step 2.
The [Transfer Setup] is displayed.
Step 3.
Set the [Transfer Setup]:
PLC side I/F : GOT
Other station : No specification
Step 4.
Double-click [GOT] of the CPU side I/F to display [CPU side I/F Detailed Setting of GOT].
Step 5.
Mark the [via GOT(Bus) transparent mode] checkbox on the [CPU side I/F Detailed Setting of GOT]
screen.
Step 6.
The screen returns to [Transfer Setup]. Click [Connection Test] to check if Setting/Monitoring tool for C
Controller module has been connected to the motion controller (Q mode).
22 - 146
22.7 Personal Computer Side Setting
[Connection Destination] [(Connection target data name)] in