22.7.8
Accessing by the MT Works2
This section explains the procedure to set the FA transparent function of MT Works2 with an example of connecting to
motion controller CPU (Q series).
■1. When connecting the GOT and the personal computer by USB
(1) Connecting the GOT and PLC in bus connection or direct CPU connection
Step 1.
Click [Transfer setup]
Step 2.
The [Transfer setup] is displayed.
Step 3.
Set the [Transfer setup]:
PC side I/F: Serial USB
CPU side I/F: GOT
Other Station Setting : No specification
Step 4.
Double-click [Serial] of the PLC side I/F to display [PC side I/F Serial setting].
22 - 120
22.7 Personal Computer Side Setting
[Online].