Table of Contents
Advertisement
96
en | Network
13.3
Advanced
13.3.1
Cloud-based Services
The operation mode determines how the camera communicates
with Bosch Cloud-based Security and Services. For more
information about these services and their availability, visit:
http://cloud.boschsecurity.com
–
–
–
13.3.2
RTSP port
If necessary, select a different port for the exchange of the RTSP
data from the list. The standard RTSP port is 554. Select Off to
deactivate the RTSP function.
13.3.3
Authentication (802.1x)
To configure Radius server authentication, connect the unit
directly to a computer using a network cable. If a Radius server
controls access rights over the network, select On to activate
authentication to communicate with the unit.
1.
2.
13.3.4
TCP metadata input
The device can receive data from an external TCP sender, for
example an ATM or POS device, and store it as metadata. Select
the port for TCP communication. Select Off to deactivate the
function. Enter a valid Sender IP address.
2015.04 | v1.592 | AM18-Q0678
Select Auto to allow the camera to poll the server a few
times; if no contact is made, it stops polling.
Select On to constantly poll the server.
Select Off to block polling.
Enter the user name that the Radius server uses for the unit
in the Identity field.
Enter the Password that the Radius server expects from
the unit.
Camera Browser
Interface
Bosch Security Systems
Advertisement
Table of Contents
