Display Stamping; Camera Name Stamping; Time Stamping; Display Milliseconds - Bosch DINION IP 5000 MP Software Manual

Camera Browser
Interface
5.4

Display Stamping

Various overlays or stamps in the video image provide important
supplementary information. These overlays can be enabled
individually and arranged on the image in a clear manner.
5.4.1

Camera name stamping

Select the position of the camera name overlay in the drop-
down box. It can be displayed at the Top, at the Bottom, or at a
position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y
position fields.
5.4.2

Time stamping

Select the position of the time and date overlay in the drop-
down box. It can be displayed at the Top, at the Bottom, or at a
position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y
position fields.
5.4.3

Display milliseconds

If necessary, display milliseconds for Time stamping. This
information can be useful for recorded video images; however, it
does increase the processor's computing time. Select Off if
displaying milliseconds is not needed.
5.4.4

Alarm mode stamping

Select On in the drop-down box for a text message to be
displayed in the event of an alarm. It can be displayed at a
position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y
position fields.
Bosch Security Systems
General settings | en
2015.04 | v1.592 | AM18-Q0678
31