Table of Contents
Advertisement
Camera Browser
Interface
4
3.1.7
Recording video sequences
Sections of the video sequence that is currently being shown on
the LIVE page can be saved on the computer's hard drive. The
sequences are recorded at the resolution specified in the
encoder configuration. The storage location depends on the
configuration of the camera.
1.
2.
Play back saved video sequences using the Player from
Bosch Security Systems.
3.1.8
Full-screen display
Click the full-screen icon
full-screen mode; press any key on the keyboard to return to the
normal viewing window.
3.1.9
Audio communication
Audio can be sent and received via the LIVE page if the unit and
the computer support audio.
1.
2.
All connected users receive audio signals sent from the unit but
only the user who first pressed the F12 key can send audio
signals; others must wait for the first user to release the key.
Bosch Security Systems
Click the camera icon
The storage location depends on the configuration of the
camera.
Click the recording icon
–
Saving begins immediately. The red dot on the icon
indicates that a recording is in progress.
Click the recording icon again to stop recording.
Press and hold the F12 key on the keyboard to send an
audio signal to the unit.
Release the key to stop sending audio.
Operation via the browser | en
to save a single image.
to record video sequences.
to view the selected stream in
2015.04 | v1.592 | AM18-Q0678
17
Advertisement
Table of Contents
