Table of Contents
Advertisement
Camera Browser
Interface
iSCSI Media
To use an iSCSI system as the storage medium, a connection to
the desired iSCSI system is required to set the configuration
parameters.
The storage system selected must be available on the network
and completely set up. It must have an IP address and be
divided into logical drives (LUNs).
1.
2.
3.
The Storage overview field displays the logical drives.
Local Media
An SD card inserted in the camera can be used for local
recording (not available on some cameras).
4
The Storage overview field displays the local media.
Note:
SD card recording performance is highly dependent on the
speed (class) and performance of the SD card. An SD card of
Class 6 or higher is recommended.
9.1.3
Activating and configuring storage media
Available media or iSCSI drives must be transferred to the
Managed storage media list, activated, and configured for
storage.
Bosch Security Systems
Enter the IP address of the required iSCSI destination in
the iSCSI IP address field.
If the iSCSI destination is password protected, enter the
password into the Password field.
Click Read.
–
The connection to the IP address is established.
If the SD card is password protected, enter the password
into the Password field.
Recording | en
2015.04 | v1.592 | AM18-Q0678
61
Advertisement
Table of Contents
