Picture Settings - Enhance; Sharpness Level; Backlight Compensation; Contrast Enhancement - Bosch DINION IP 5000 MP Software Manual

46 en | Camera
7.5 Picture settings – Enhance
7.5.1

Sharpness level

The slider adjusts the sharpness level between -15 and +15.
Zero position of the slider corresponds to the factory default
level.
A low (negative) value makes the picture less sharp. Increasing
sharpness brings out more detail. Extra sharpness can enhance
the details of license plates, facial features and the edges of
certain surfaces but can increase bandwidth requirements.
7.5.2

Backlight Compensation

Select Off to switch off backlight compensation.
Select On to capture details in high-contrast and extremely
bright-dark conditions.
7.5.3

Contrast enhancement

Select On to increase the contrast in low contrast conditions.
7.5.4

Intelligent DNR

Select On to activate intelligent Dynamic Noise Reduction (DNR)
which reduces noise based on motion and light levels.
Temporal noise filtering
Adjusts the Temporal noise filtering level between -15 and +15.
The higher the value, the more noise filtering.
Spatial noise filtering
Adjusts the Spatial noise filtering level between -15 and +15.
The higher the value, the more noise filtering.
2015.04 | v1.592 | AM18-Q0678
Camera Browser
Interface
Bosch Security Systems