Yamaha CL5 Reference Manual page 7

SELECTED CHANNEL VIEW screen
◆ SEND field
In this field, you can view the send level and pre/post from the channel
to each MIX/MATRIX bus. You can also switch the on/off status of the
send signals. The view and the function of the knobs and buttons in
the SEND field vary depending on whether a pair of bus channels
(odd-numbered and even-numbered) are comprised of two mono
channels or a stereo channel.
1
Tabs
Enable you to select a group of 16 output bus channels to be
displayed in the SEND field.
• MIX1-16 tab............................ displays MIX buses 1-16.
• MIX17-24/MATRIX tab ........... displays MIX buses 17-24 and
MATRIX buses 1-8.
If the destination bus channels are two mono channels:
1
2
3
1
SEND knob
Adjusts the send level to the corresponding bus.
2
PRE indicator
The type of the corresponding bus is indicated. If the type is VARI [PRE EQ] or VARI [PRE
FADER], and if the PRE button on the MIX SEND 8ch screen is turned ON, the type is
displayed.
3
ON button
Switches the send signal to the corresponding bus on or off.
If the destination bus is a stereo channel:
1
1
SEND/PAN knob
The right-hand knob adjusts the level of the signal sent to a pair of bus channels (even-
numbered and odd-numbered). The left-hand knob adjusts the pan and balance of the
same signal.
2
PRE indicator
The type of the corresponding bus is indicated.
3
ON button
Switches the send signal to the two buses on or off.
NOTE
• If the type of the destination bus is set to FIXED, controllers
be displayed.
• Press the SEND knob or PAN knob on screen to open the SEND 8ch window.
7
1
2
3
SELECTED CHANNEL section
2 3
and mentioned above will not
Reference Manual