Yamaha CL5 Reference Manual page 114

NOTE
• The cue signal is sent to the monitor output and PHONES Out jacks regardless of whether the
CUE OUTPUT button is on or off. However, the cue signal will no longer be sent to monitor output
if CUE INTERRUPTION is turned off. The cue signal is always sent to the PHONES Out jack,
regardless of the CUE INTERRUPTION setting.
• When using the MIX/MATRIX bus select buttons in the SENDS ON FADER window, you can
press the selected button once again to turn on Cue for the corresponding MIX/MATRIX channel
(page 39).
• If you want cue operations and channel select operations to be linked, open the USER SETUP
window,
• You can also assign the function of the CLEAR CUE button to a USER DEFINED key
• If PHONES LEVEL LINK
(page 104) in the MONITOR screen is ON, the cue signal level when
monitoring through headphones can be adjusted using both the MONITOR LEVEL knob and the
PHONES LEVEL knob.
• To adjust the level to the output destination port for the cue signal, adjust the gain of the output
port that is patched to it.
• If you turn on the [CUE] key, the background of the cue meter in the Function Access Area will
turn blue, indicating the cue output level. The upper part of the cue meter shows an abbreviation
indicating the currently-on cue group or cue button. The abbreviations displayed for the cue
meters have the following meaning.
IN INPUT CUE group
DCA
DCA CUE group
OUT OUTPUT CUE group
CUE button in the EFFECT and PREMIUM RACK windows
EFFECT
(Other CUE groups)
KEY IN CUE button in the DYNAMICS1 window
KEY IN
(Other CUE groups)
CUE meter
MONITOR screen
The CUE field of the MONITOR screen lets you check the current Cue settings, and turn Cue
on/off.
2
1
page 196).
(page 197).
1
CUE display button
When you press this button, the CUE window will appear, in which you can make
detailed cue settings.
2
CUE MODE buttons
Select the cue mode. You can select MIX CUE mode (all selected channels will be cued),
or LAST CUE mode (only the channel selected most recently will be cued).
3
INPUT/DCA/OUTPUT CUE section
Indicates the settings for input cue, DCA cue, and output cue. Press this field to open
the CUE window.
4
CUE OUTPUT button
Switches the cue output on or off.
5 CLEAR CUE button
Cancels all cue selections simultaneously. If MIX CUE mode has been selected, all of the
selected channels will be cleared.
111
Monitor and Cue functions
3
4
5
Reference Manual