Digital mixing console
cl/ql series v4.5 supplementary manual
cl/ql editor v4.5 supplementary manual (8 pages)
Summary of Contents for Yamaha QL Series
Page 1
CL/QL series V5.1 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in CL5/CL3/CL1 and QL5/QL1 firmware V5.1. Use it in conjunction with the CL5/CL3/CL1 and QL5/QL1 Owner’s Manual and Reference Manual. NOTE • The explanations in this supplementary manual reference the CL5.
Contents Contents I/O devices and external head amps ........Added supported devices ..................Remotely controlling an external head amp............. Remotely controlling wireless units ................Remotely controlling an amp................... Information This product uses open source software. For information about the license, refer to *** (product name) _OSSLicense_e.pdf, which is included in the downloaded file.
Now supports the HA remote controllable devices. Now supports various Dante devices such as digital wireless receivers, processors, and more • Stagetec NEXUS(XDIP) Multichannel I/O Board from third-party partners, plus NEXO and Yamaha. • Yamaha MRX/MTX series Signal Processors • Sony DWR-R03D DWX Digital Wireless Receiver •...
Page 4
For devices with a wider setting range than the CL/QL series, since some values cannot be set from the CL/QL series. Likewise, if the value set on the connected device side is outside the CL/ QL series setting range, it will be displayed as an approximate value or limit value.
I/O devices and external head amps Remotely controlling wireless units Audio level indicator Lights if the audio signal level of the receiver reaches the overload point. Now supports wireless units as remote controllable devices. MUTE indicator • Sony DWR-R03D DWX Digital Wireless Receiver Indicates the mute status (on/off) of the audio signal for the receiver.
Page 6
Sets the gain value for the transmitter. To adjust the value, touch the screen, then press the knob to select it, and use the multifunction knobs (CL series) or the TOUCH AND TURN knob (QL series). The knob will not display when the wireless device is not support this control.
Now supports the remote controllable devices. Control status indicator • NEXO NXAMPmk2 Powered TD Controller Indicates the control status of the device. • Yamaha DZR- D series Powered Loudspeakers DXS XLF-D series Powered Subwoofers Device status indicator Indicates the status of the device.
Page 8
I/O devices and external head amps I/O DEVICE EDIT screen CABINET Displays the name of NEXO Setup selected in the NXAMP. This screen is displayed when you select the desired I/O device in the I/O DEVICE screen (AMP page). You can remotely control the amplifier or the speakers. VERSION Displays the firmware version of the device.
Page 9
I/O devices and external head amps For Yamaha DZR-D series, DXS XLF-D series DELAY ON button Switches the delay on or off. DELAY knob Sets the delay time. DELAY TIME Displays the delay time by time (TIME) and distance (meter, feet).