Panasonic KX-NS1000 Pc Programming Manual page 438

9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Value Range
None, 6.5 ms, 8 ´ n (n=1–112) ms
Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Feature Manual References
4.1.23 CPC (Calling Party Control) Signal Detection
DTMF Width
Selects the length of the DTMF tone sent to the analog CO line.
Default
80 ms
Value Range
80 ms, 160 ms
Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Pulse Speed
Selects the speed at which pulse dials are sent to the analog CO line.
Default
Low
Value Range
Low, High
Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Reverse Detection
Selects the type of CO line call for which the reverse signal from the telephone company is detected.
Default
Disable
Value Range
Disable: For no CO line call
Outgoing: For outgoing CO line calls only
Both Call: For both outgoing and incoming CO line calls
438 PC Programming Manual Document Version 2016-03